Showing posts with label Extruder. Show all posts
Showing posts with label Extruder. Show all posts

Tuesday, 25 March 2014

Prusa i1 to i3 upgrade - Build day 4

Real date 16/03/2014
As with Day 3 I was feeling terrible, so didn't spend as much time as I had planned (was aiming to be printing Saturday night).


As previously mentioned I'm following this guide and will only be documenting things I have trouble with or do which the guide doesn't state.

Z Axis

The motor and Z axis holders have 3 holes on one side and only 2 one the other.
Do not drill the blanked side out.



As you can see adding a screw in into the frame at that position wouldn't make sense.
I suspect the generation script doesn't fully remove the extra screw hole which is used on another variant.

Once you have the motor holder and top rod holder in place, remove the screws from the top piece.
This isn't show or said in the guide, but you'll need to be able to add the X axis to the frame.


X axis

The assembly is one of the easiest parts, however getting the Z axis rod to move smoothly throught the nut is a little tricky.
In the end I used a 6mm drill be to enlarge the hole, this means the 5mm threaded rod doesn't snag or attach to anything but the washer.
I wouldn't go any larger then 6mm as the M5 nut would run the risk of slipping out.

Note I reused one of the 608zz bearings for the X axis and the belt looks like its not going to slip. However the is a gap so I will be on my list of parts to order.


Extruder

I got a new extruder a freebie from 3DPrinterPunk because they forgot to send me the Y corners.
Its a Herringbone Greg's accessable extuder.
The assembly is pretty much the same as Wades only with less parts which is always nice.

The thing to note is the extruder uses a 17mm piece to hold the idler bearing in place as opposed a 20mm piece used in my old Wade.
Its worth noting with the compact X carriage and this extuder you can't double the nut at this side as the clearance is small and the second nut will catch on the X carriage.


End of Day 4

Getting the belts right on the X carriage took a while as did getting the Z axis threaded rod moving smoothly (I started with a 3mm drill bit and worked upto 6mm).
I've not documented it, however about 1 hour of the build time was actually disassembling my old Prusa as I needed the bearings for the extruder (I used the extruder bearings for the X and Y axis).
Prusa i1 frame vs Prusa i3 frame


Days build time: ~2 hour
Total build time: ~6 hours

Monday, 17 October 2011

Hardware + Extruder

As you can tell by the number of posts my project is flying along at this stage.

Since the plastics arrived on Saturday and electrics ordered, I really need to get a move on with the hardware and extruder.

As I started to enter the items from my BOM into the cart at Thingfarm I noticed all the stepper motor kits where sold out.
No trouble as I can just use Zapp Automation, its a tad more expensive, which means I can get all the parts around the same time.
Nope all the nema 17 stepper motors suitable for my RepRap where also sold out.

After browsing various other RepRap stores I noticed a trend they where either sold out of nema 17 stepper motors or charging €18+ each (excluding shipping) for them.
Well over the £65 budget for the motors.

I contacted Thingfarm and was informed they would be ordering more stock the same day, however the lead time as roughly 2 weeks. Not only this, but the cost might be more (due to an increased price from there supplier).

I could order the single motors for £13 each or just wait a few days and see if Zapp Automation or Thingfarm get new stock.

For the moment I picked the latter.

Hardware and Extruder order

Prusa Hardware kit (T5) - £46.67
J Head Nozzle MK2 - £35
Wade's Extruder Hardware Kit - £18
Kapton Tape - £3.33
Delivery - £5

Total - £108

Why did I pick Thingfarm?

Because the prices are great, they include extras and a few freebies.
The above order includes 100 cable ties, plumbers tape and heat shrink tubing all free.

On top of this after placing the order I noticed I needed an extra 8 M3x20 bolts, nuts and washers. Gingerly I sent a message to Thingfarm if this would be ok. Within a few minutes I got a reply saying it would be fine and they are considering added them to the kit as a standard.
Thats what I call good customer service.


Hot Ends

There are 3 main types of hot ends currently being using for RepRaps.
  • Arcol.hu
  • J Head
  • Simple (don't know the correct name)

Arcol.hu. is the most complex design, the looks and number of parts put me off this design almost straight away. Its also considerably more expensive to source in the UK then the alternatives.
J Head, combines the nozzle and heater block, making the hot end form a J shape.
Simple, is almost the same as J Head only with a separate heater block.

For me it was a choice between J Head and the standard simple design.
In the end it came down to cost, a standard hot end with the resistor and thermistor worked out at £40+, the J Head worked out at £30+.
Plus I prefer the look of the J Head nozzle.

I choose MK2, as after reading as much documentation as I could find about J Head nozzles/hot ends, is designed to be easier to mount. As this is my first build I want this to go as smoothly as possible so I spent the extra £5.


Cost of Hardware and Extruder - £108
Total Cost so far -  £298.29